Marketing Research
Updated on Friday, May 05, 2017
,
tags # # #
Managers need information in order to introduce products and services that create value in the mind of the customer. But the perception of value is a subjective one, and what customers value this year may be quite different from what they value next year. As such, the attributes that create value cannot simply be deduced from common knowledge. Rather, data must be collected and analyzed. The goal of marketing research is to provide the facts and direction that managers need to make their more important marketing decisions.
To maximize the benefit of marketing research, those who use it need to understand the research process and its limitations.
Marketing Research vs. Market Research
These terms often are used interchangeably, but technically there is a difference.
Market research deals specifically with the gathering of information about a market's size and trends. Marketing research covers a wider range of activities. While it may involve market research, marketing research is a more general systematic process that can be applied to a variety of marketing problems.The Value of Information
Information can be useful, but what determines its real value to the organization? In general, the value of information is determined by:
 The ability and willingness to act on the information.
 The accuracy of the information.
 The level of indecisiveness that would exist without the information.
 The amount of variation in the possible results.
 The level of risk aversion.
 The reaction of competitors to any decision improved by the information.
 The cost of the information in terms of time and money.
The Marketing Research Process
Once the need for marketing research has been established, most marketing research projects involve these steps:
 Define the problem
 Determine research design
 Identify data types and sources
 Design data collection forms and questionnaires
 Determine sample plan and size
 Collect the data
 Analyze and interpret the data
 Prepare the research report
Problem Definition
The decision problem faced by management must be translated into a market research problem in the form of questions that define the information that is required to make the decision and how this information can be obtained. Thus, the decision problem is translated into a research problem. For example, a decision problem may be whether to launch a new product. The corresponding research problem might be to assess whether the market would accept the new product.
The objective of the research should be defined clearly. To ensure that the true decision problem is addressed, it is useful for the researcher to outline possible scenarios of the research results and then for the decision maker to formulate plans of action under each scenario. The use of such scenarios can ensure that the purpose of the research is agreed upon before it commences.
Research Design
Marketing research can classified in one of three categories:
 Exploratory research
 Descriptive research
 Causal research
These classifications are made according to the objective of the research. In some cases the research will fall into one of these categories, but in other cases different phases of the same research project will fall into different categories.

Exploratory research has the goal of formulating problems more precisely, clarifying concepts, gathering explanations, gaining insight, eliminating impractical ideas, and forming hypotheses. Exploratory research can be performed using a literature search, surveying certain people about their experiences, focus groups, and case studies. When surveying people, exploratory research studies would not try to acquire a representative sample, but rather, seek to interview those who are knowledgeable and who might be able to provide insight concerning the relationship among variables. Case studies can include contrasting situations or benchmarking against an organization known for its excellence. Exploratory research may develop hypotheses, but it does not seek to test them. Exploratory research is characterized by its flexibility.

Descriptive research is more rigid than exploratory research and seeks to describe users of a product, determine the proportion of the population that uses a product, or predict future demand for a product. As opposed to exploratory research, descriptive research should define questions, people surveyed, and the method of analysis prior to beginning data collection. In other words, the who, what, where, when, why, and how aspects of the research should be defined. Such preparation allows one the opportunity to make any required changes before the costly process of data collection has begun.
There are two basic types of descriptive research: longitudinal studies and crosssectional studies. Longitudinal studies are time series analyses that make repeated measurements of the same individuals, thus allowing one to monitor behavior such as brandswitching. However, longitudinal studies are not necessarily representative since many people may refuse to participate because of the commitment required. Crosssectional studies sample the population to make measurements at a specific point in time. A special type of crosssectional analysis is a cohort analysis, which tracks an aggregate of individuals who experience the same event within the same time interval over time. Cohort analyses are useful for longterm forecasting of product demand.

Causal research seeks to find cause and effect relationships between variables. It accomplishes this goal through laboratory and field experiments.
Data Types and Sources
Secondary Data
Before going through the time and expense of collecting primary data, one should check for secondary data that previously may have been collected for other purposes but that can be used in the immediate study. Secondary data may be internal to the firm, such as sales invoices and warranty cards, or may be external to the firm such as published data or commercially available data. The government census is a valuable source of secondary data.
Secondary data has the advantage of saving time and reducing data gathering costs. The disadvantages are that the data may not fit the problem perfectly and that the accuracy may be more difficult to verify for secondary data than for primary data.
Some secondary data is republished by organizations other than the original source. Because errors can occur and important explanations may be missing in republished data, one should obtain secondary data directly from its source. One also should consider who the source is and whether the results may be biased.
There are several criteria that one should use to evaluate secondary data.

Whether the data is useful in the research study.

How current the data is and whether it applies to time period of interest.

Errors and accuracy  whether the data is dependable and can be verified.

Presence of bias in the data.

Specifications and methodologies used, including data collection method, response rate, quality and analysis of the data, sample size and sampling technique, and questionnaire design.

Objective of the original data collection.

Nature of the data, including definition of variables, units of measure, categories used, and relationships examined.
Primary Data
Often, secondary data must be supplemented by primary data originated specifically for the study at hand. Some common types of primary data are:
 demographic and socioeconomic characteristics
 psychological and lifestyle characteristics
 attitudes and opinions
 awareness and knowledge  for example, brand awareness
 intentions  for example, purchase intentions. While useful, intentions are not a reliable indication of actual future behavior.
 motivation  a person's motives are more stable than his/her behavior, so motive is a better predictor of future behavior than is past behavior
 behavior
Primary data can be obtained by communication or by observation. Communication involves questioning respondents either verbally or in writing. This method is versatile, since one needs only to ask for the information; however, the response may not be accurate. Communication usually is quicker and cheaper than observation. Observation involves the recording of actions and is performed by either a person or some mechanical or electronic device. Observation is less versatile than communication since some attributes of a person may not be readily observable, such as attitudes, awareness, knowledge, intentions, and motivation. Observation also might take longer since observers may have to wait for appropriate events to occur, though observation using scanner data might be quicker and more cost effective. Observation typically is more accurate than communication.
Personal interviews have an interviewer bias that mailin questionnaires do not have. For example, in a personal interview the respondent's perception of the interviewer may affect the responses.
Questionnaire Design
The questionnaire is an important tool for gathering primary data. Poorly constructed questions can result in large errors and invalidate the research data, so significant effort should be put into the questionnaire design. The questionnaire should be tested thoroughly prior to conducting the survey.
Measurement Scales
Attributes can be measured on nominal, ordinal, interval, and ratio scales:

Nominal numbers are simply identifiers, with the only permissible mathematical use being for counting. Example: social security numbers.

Ordinal scales are used for ranking. The interval between the numbers conveys no meaning. Median and mode calculations can be performed on ordinal numbers. Example: class ranking

Interval scales maintain an equal interval between numbers. These scales can be used for ranking and for measuring the interval between two numbers. Since the zero point is arbitrary, ratios cannot be taken between numbers on an interval scale; however, mean, median, and mode are all valid. Example: temperature scale

Ratio scales are referenced to an absolute zero values, so ratios between numbers on the scale are meaningful. In addition to mean, median, and mode, geometric averages also are valid. Example: weight
Validity and Reliability
The validity of a test is the extent to which differences in scores reflect differences in the measured characteristic. Predictive validity is a measure of the usefulness of a measuring instrument as a predictor. Proof of predictive validity is determined by the correlation between results and actual behavior. Construct validity is the extent to which a measuring instrument measures what it intends to measure.
Reliability is the extent to which a measurement is repeatable with the same results. A measurement may be reliable and not valid. However, if a measurement is valid, then it also is reliable and if it is not reliable, then it cannot be valid. One way to show reliability is to show stability by repeating the test with the same results.
Attitude Measurement
Many of the questions in a marketing research survey are designed to measure attitudes. Attitudes are a person's general evaluation of something. Customer attitude is an important factor for the following reasons:
 Attitude helps to explain how ready one is to do something.
 Attitudes do not change much over time.
 Attitudes produce consistency in behavior.
 Attitudes can be related to preferences.
Attitudes can be measured using the following procedures:

Selfreporting  subjects are asked directly about their attitudes. Selfreporting is the most common technique used to measure attitude.

Observation of behavior  assuming that one's behavior is a result of one's attitudes, attitudes can be inferred by observing behavior. For example, one's attitude about an issue can be inferred by whether he/she signs a petition related to it.

Indirect techniques  use unstructured stimuli such as word association tests.

Performance of objective tasks  assumes that one's performance depends on attitude. For example, the subject can be asked to memorize the arguments of both sides of an issue. He/she is more likely to do a better job on the arguments that favor his/her stance.

Physiological reactions  subject's response to a stimuli is measured using electronic or mechanical means. While the intensity can be measured, it is difficult to know if the attitude is positive or negative.

Multiple measures  a mixture of techniques can be used to validate the findings, especially worthwhile when selfreporting is used.
There are several types of attitude rating scales:

Equalappearing interval scaling  a set of statements are assembled. These statements are selected according to their position on an interval scale of favorableness. Statements are chosen that has a small degree of dispersion. Respondents then are asked to indicate with which statements they agree.

Likert method of summated ratings  a statement is made and the respondents indicate their degree of agreement or disagreement on a five point scale (Strongly Disagree, Disagree, Neither Agree Nor Disagree, Agree, Strongly Agree).

Semantic differential scale  a scale is constructed using phrases describing attributes of the product to anchor each end. For example, the left end may state, "Hours are inconvenient" and the right end may state, "Hours are convenient". The respondent then marks one of the seven blanks between the statements to indicate his/her opinion about the attribute.

Stapel Scale  similar to the semantic differential scale except that 1) points on the scale are identified by numbers, 2) only one statement is used and if the respondent disagrees a negative number should marked, and 3) there are 10 positions instead of seven. This scale does not require that bipolar adjectives be developed and it can be administered by telephone.

Qsort technique  the respondent if forced to construct a normal distribution by placing a specified number of cards in one of 11 stacks according to how desirable he/she finds the characteristics written on the cards.
Sampling Plan
The sampling frame is the pool from which the interviewees are chosen. The telephone book often is used as a sampling frame, but have some shortcomings. Telephone books exclude those households that do not have telephones and those households with unlisted numbers. Since a certain percentage of the numbers listed in a phone book are out of service, there are many people who have just moved who are not sampled. Such sampling biases can be overcome by using random digit dialing. Mall intercepts represent another sampling frame, though there are many people who do not shop at malls and those who shop more often will be overrepresented unless their answers are weighted in inverse proportion to their frequency of mall shopping.
In designing the research study, one should consider the potential errors. Two sources of errors are random sampling error and nonsampling error. Sampling errors are those due to the fact that there is a nonzero confidence interval of the results because of the sample size being less than the population being studied. Nonsampling errors are those caused by faulty coding, untruthful responses, respondent fatigue, etc.
There is a tradeoff between sample size and cost. The larger the sample size, the smaller the sampling error but the higher the cost. After a certain point the smaller sampling error cannot be justified by the additional cost.
While a larger sample size may reduce sampling error, it actually may increase the total error. There are two reasons for this effect. First, a larger sample size may reduce the ability to follow up on nonresponses. Second, even if there is a sufficient number of interviewers for followups, a larger number of interviewers may result in a less uniform interview process.
Data Collection
In addition to the intrinsic sampling error, the actual data collection process will introduce additional errors. These errors are called nonsampling errors. Some nonsampling errors may be intentional on the part of the interviewer, who may introduce a bias by leading the respondent to provide a certain response. The interviewer also may introduce unintentional errors, for example, due to not having a clear understanding of the interview process or due to fatigue.
Respondents also may introduce errors. A respondent may introduce intentional errors by lying or simply by not responding to a question. A respondent may introduce unintentional errors by not understanding the question, guessing, not paying close attention, and being fatigued or distracted.
Such nonsampling errors can be reduced through quality control techniques.
Data Analysis  Preliminary Steps
Before analysis can be performed, raw data must be transformed into the right format. First, it must be edited so that errors can be corrected or omitted. The data must then be coded; this procedure converts the edited raw data into numbers or symbols. A codebook is created to document how the data was coded. Finally, the data is tabulated to count the number of samples falling into various categories. Simple tabulations count the occurrences of each variable independently of the other variables. Cross tabulations, also known as contingency tables or cross tabs, treats two or more variables simultaneously. However, since the variables are in a twodimensional table, cross tabbing more than two variables is difficult to visualize since more than two dimensions would be required. Cross tabulation can be performed for nominal and ordinal variables.
Cross tabulation is the most commonly utilized data analysis method in marketing research. Many studies take the analysis no further than cross tabulation. This technique divides the sample into subgroups to show how the dependent variable varies from one subgroup to another. A third variable can be introduced to uncover a relationship that initially was not evident.
Conjoint Analysis
The conjoint analysis is a powerful technique for determining consumer preferences for product attributes.
Hypothesis Testing
A basic fact about testing hypotheses is that a hypothesis may be rejected but that the hypothesis never can be unconditionally accepted until all possible evidence is evaluated. In the case of sampled data, the information set cannot be complete. So if a test using such data does not reject a hypothesis, the conclusion is not necessarily that the hypothesis should be accepted.
The null hypothesis in an experiment is the hypothesis that the independent variable has no effect on the dependent variable. The null hypothesis is expressed as H0. This hypothesis is assumed to be true unless proven otherwise. The alternative to the null hypothesis is the hypothesis that the independent variable does have an effect on the dependent variable. This hypothesis is known as the alternative, research, or experimental hypothesis and is expressed as H1. This alternative hypothesis states that the relationship observed between the variables cannot be explained by chance alone.
There are two types of errors in evaluating a hypotheses:
 Type I error: occurs when one rejects the null hypothesis and accepts the alternative, when in fact the null hypothesis is true.
 Type II error: occurs when one accepts the null hypothesis when in fact the null hypothesis is false.
Because their names are not very descriptive, these types of errors sometimes are confused. Some people jokingly define a Type III error to occur when one confuses Type I and Type II. To illustrate the difference, it is useful to consider a trial by jury in which the null hypothesis is that the defendant is innocent. If the jury convicts a truly innocent defendant, a Type I error has occurred. If, on the other hand, the jury declares a truly guilty defendant to be innocent, a Type II error has occurred.
Hypothesis testing involves the following steps:
 Formulate the null and alternative hypotheses.
 Choose the appropriate test.
 Choose a level of significance (alpha)  determine the rejection region.
 Gather the data and calculate the test statistic.
 Determine the probability of the observed value of the test statistic under the null hypothesis given the sampling distribution that applies to the chosen test.
 Compare the value of the test statistic to the rejection threshold.
 Based on the comparison, reject or do not reject the null hypothesis.
 Make the marketing research conclusion.
In order to analyze whether research results are statistically significant or simply by chance, a test of statistical significance can be run.
Tests of Statistical Significance
The chisquare ( c^{2} ) goodnessoffit test is used to determine whether a set of proportions have specified numerical values. It often is used to analyze bivariate crosstabulated data. Some examples of situations that are wellsuited for this test are:
 A manufacturer of packaged products test markets a new product and wants to know if sales of the new product will be in the same relative proportion of package sizes as sales of existing products.
 A company's sales revenue comes from Product A (50%), Product B (30%), and Product C (20%). The firm wants to know whether recent fluctuations in these proportions are random or whether they represent a real shift in sales.
The chisquare test is performed by defining k categories and observing the number of cases falling into each category. Knowing the expected number of cases falling in each category, one can define chisquared as:
c^{2} = å ( O_{i}  E_{i} )^{2} / E_{i}
where
O_{i} = the number of observed cases in category i,
E_{i} = the number of expected cases in category i,
k = the_{ }number of categories,
the_{ }summation runs from i = 1 to i = k.
Before calculating the chisquare value, one needs to determine the expected frequency for each cell. This is done by dividing the number of samples by the number of cells in the table.
To use the output of the chisquare function, one uses a chisquare table. To do so, one needs to know the number of degrees of freedom (df). For chisquare applied to crosstabulated data, the number of degrees of freedom is equal to
This is equal to the number of categories minus one. The conventional critical level of 0.05 normally is used. If the calculated output value from the function is greater than the chisquare lookup table value, the null hypothesis is rejected.
ANOVA
Another test of significance is the Analysis of Variance (ANOVA) test. The primary purpose of ANOVA is to test for differences between multiple means. Whereas the ttest can be used to compare two means, ANOVA is needed to compare three or more means. If multiple ttests were applied, the probability of a TYPE I error (rejecting a true null hypothesis) increases as the number of comparisons increases.
Oneway ANOVA examines whether multiple means differ. The test is called an Ftest. ANOVA calculates the ratio of the variation between groups to the variation within groups (the F ratio). While ANOVA was designed for comparing several means, it also can be used to compare two means. Twoway ANOVA allows for a second independent variable and addresses interaction.
To run a oneway ANOVA, use the following steps:
 Identify the independent and dependent variables.
 Describe the variation by breaking it into three parts_{ }  the total variation, the portion that is within groups,_{ } and the portion that is between groups (or among groups for more than two groups). The total variation (SS_{total}) is the sum of the squares of the differences between each value_{ }and the grand mean of all the values in all the groups._{ } The ingroup variation (SS_{within}) is the sum of the squares of the differences_{ }in each element's value and the group mean. The variation between group means (SS_{between}) is the total variation minus the ingroup variation (SS_{total}  SS_{within}).
 Measure the difference between each group's mean and the grand mean.
 Perform a significance test on the differences.
 Interpret the results.
This Ftest assumes that the group variances are approximately equal and that the observations are independent. It also assumes normally distributed data; however, since this is a test on means the Central Limit Theorem holds as long as the sample size is not too small.
ANOVA is efficient for analyzing data using relatively few observations and can be used with categorical variables. Note that regression can perform a similar analysis to that of ANOVA.
Discriminant Analysis
Analysis of the difference in means between groups provides information about individual variables, it is not useful for determine their individual impacts when the variables are used in combination. Since some variables will not be independent from one another, one needs a test that can consider them simultaneously in order to take into account their interrelationship. One such test is to construct a linear combination, essentially a weighted sum of the variables. To determine which variables discriminate between two or more naturally occurring groups, discriminant analysis is used. Discriminant analysis can determine which variables are the best predictors of group membership. It determines which groups differ with respect to the mean of a variable, and then uses that variable to predict new cases of group membership. Essentially, the discriminant function problem is a oneway ANOVA problem in that one can determine whether multiple groups are significantly different from one another with respect to the mean of a particular variable.
A discriminant analysis consists of the following steps:
 Formulate the problem.
 Determine the discriminant function coefficients that result in the highest ratio of betweengroup variation to withingroup variation.
 Test the significance of the discriminant function.
 Interpret the results.
 Determine the validity of the analysis.
Discriminant analysis analyzes the dependency relationship, whereas factor analysis and cluster analysis address the interdependency among variables.
Factor Analysis
Factor analysis is a very popular technique to analyze interdependence. Factor analysis studies the entire set of interrelationships without defining variables to be dependent or independent. Factor analysis combines variables to create a smaller set of factors. Mathematically, a factor is a linear combination of variables. A factor is not directly observable; it is inferred from the variables. The technique identifies underlying structure among the variables, reducing the number of variables to a more manageable set. Factor analysis groups variables according to their correlation.
The factor loading can be defined as the correlations between the factors and their underlying variables. A factor loading matrix is a key output of the factor analysis. An example matrix is shown below.
Factor 1  Factor 2  Factor 3  
Variable 1  
Variable 2  
Variable 3  
Column's Sum of Squares: 
Each cell in the matrix represents correlation between the variable and the factor associated with that cell. The square of this correlation represents the proportion of the variation in the variable explained by the factor. The sum of the squares of the factor loadings in each column is called an eigenvalue. An eigenvalue represents the amount of variance in the original variables that is associated with that factor. The communality is the amount of the variable variance explained by common factors.
A rule of thumb for deciding on the number of factors is that each included factor must explain at least as much variance as does an average variable. In other words, only factors for which the eigenvalue is greater than one are used. Other criteria for determining the number of factors include the Scree plot criteria and the percentage of variance criteria.
To facilitate interpretation, the axis can be rotated. Rotation of the axis is equivalent to forming linear combinations of the factors. A commonly used rotation strategy is the varimax rotation. Varimax attempts to force the column entries to be either close to zero or one.
Cluster Analysis
Market segmentation usually is based not on one factor but on multiple factors. Initially, each variable represents its own cluster. The challenge is to find a way to combine variables so that relatively homogenous clusters can be formed. Such clusters should be internally homogenous and externally heterogeneous. Cluster analysis is one way to accomplish this goal. Rather than being a statistical test, it is more of a collection of algorithms for grouping objects, or in the case of marketing research, grouping people. Cluster analysis is useful in the exploratory phase of research when there are no apriori hypotheses.
Cluster analysis steps:

Formulate the problem, collecting data and choosing the variables to analyze.

Choose a distance measure. The most common is the Euclidean distance. Other possibilities include the squared Euclidean distance, cityblock (Manhattan) distance, Chebychev distance, power distance, and percent disagreement.

Choose a clustering procedure (linkage, nodal, or factor procedures).

Determine the number of clusters. They should be well separated and ideally they should be distinct enough to give them descriptive names such as professionals, buffs, etc.

Profile the clusters.

Assess the validity of the clustering.
Marketing Research Report
The format of the marketing research report varies with the needs of the organization. The report often contains the following sections:
 Authorization letter for the research
 Table of Contents
 List of illustrations
 Executive summary
 Research objectives
 Methodology
 Results
 Limitations
 Conclusions and recommendations
 Appendices containing copies of the questionnaires, etc.
Concluding Thoughts
Marketing research by itself does not arrive at marketing decisions, nor does it guarantee that the organization will be successful in marketing its products. However, when conducted in a systematic, analytical, and objective manner, marketing research can reduce the uncertainty in the decisionmaking process and increase the probability and magnitude of success.
This page with a focus on , was shared by .
 7 B2B Marketing Strategies Examples For Longterm Success
 Six Steps for an Effective B2B Content Marketing Strategy
 Five Steps To Making Sales Through Social Media
 Why B2B Marketers Still Struggle at Conversion Optimization of Leads
 LinkedIn lead generation. 3 Simple Steps that can Swiftly Increase Linkedin Lead Generation
 A 3 step guide to get started on LinkedIn Sales Navigator
 LinkedIn Sales Navigator, GMail & CRM: Working Together to Boost Sales
 The Top 12 LinkedIn Tools to Improve Sales Prospecting
 6 Advanced LinkedIn Prospecting Tactics that help Sales Reps to boost sales
 How Your Team Can Make the Most of LinkedIn Sales Navigator
 How to use LinkedIn effectively as a personal CRM system
 Quality features to look for in a B2B CRM System
 10 Essential B2B Social Media Tools for Efficient Marketing
 5 Ways of using B2B CRM To Achieve Best Marketing Growth
 Important Lessons for B2B technology PR from Donald Trump’s Campaign
 LinkedIn Sales Navigator Cost: How to decide if It's Worth It
 Which B2B Social Media Network is Best for your Marketing Strategy?
 How to Leverage CRM for B2B Content Marketing
 10 Essential B2B Social Media Tools for Efficient Marketing
 B2B MARKETING IDEAS: THE SKYSCRAPER TECHNIQUE
 B2B Lead Generation Tactics in Commercial Insurance Markets
 B2B Social Media Marketing: Smart Ways to Generate Leads
 B2B Video Marketing: Best Practices to engage customers and improve conversion
 B2B SEO: Best Practices
 B2B Social Selling: Making a Foolproof Plan
 B2B Marketing Automation Market Trends
 B2B Marketing Automation: 6 Steps to Select the Best Platform
 6 Important Tips to Use Twitter for B2B Social Selling
 B2B Magazines: Top Trends and Challenges for Marketers
 B2B Websites: Best Practices to Increase Traffic and Conversion Rates
 B2B Lead Generation Company: How to choose to get the best results?
 B2B Telemarketing: 7 Tips to Boost Lead Generation
 B2B Email Marketing: 10 Quick Tactics for Lead Generation
 B2B Email Marketing Strategy: 6 Best Practices for SureShot Results
 Top 5 B2B Marketing Tools to Leverage for Automation
 A Few Ways Marketers Fail in B2B Telemarketing
 5 B2B Content Marketing Strategies for Effective Lead Generation
 Buying Email Lists for B2B Email Marketing? Bad Idea. Build an Email List of Your Own
 Top 9 Effective B2B Facebook Marketing Strategies
 Marketing Strategies for Optimum B2B Lead Generation
 7 Ideas to Engage a B2B Audience via Instagram
 Aren't You Using Quora for B2B Marketing?
 7 Actionable Tips for B2B Reddit Marketing
 5 Benefits of Business Process Management that you must consider
 5 Essentials for a successful Business Process Mapping
 5 Major Business Problems that Business Process Automation Solves
 Marketing Stats of 2016 Offer Clues to Actionable B2B Marketing Strategy for 2017
 Trends in Marketing Automation Technology Asia that you must know
 Synchronizing Sales & Marketing for a Successful B2B Marketing Campaign
 5 Important Components of Client Relationship Management
 Why Readership on Your Digital Publishing Platform is Dropping
 7 things to know about B2B commerce
 Digital Ecosystem Maps for Digital Marketing Success
 Advantages of Business Process Mapping
 Supplier Relationship management for procurement challenges
 Are you a Business Owner? 5 Benefits of Using CRM Software
 B2B Lead Generation Strategies for 2017
 Generating Leads Using LinkedIn
 Digital ecosystem for e commerce players
 What is a B2B e commerce platform
 Top 10 Benefits of B2B Ecommerce